Hussmann Reach-In Merchandiser

RLNI, RLNIE

• Product Sheets
  • English
• |  Installation & Service Manual
  • English
• |  Data Sheet
  • RLNI
  • RLNI w/InnovatorII
  • RLNIE
  • RLNIE w/InnovatorII
• |  Warranty

 

RLNI   Back to Back Reach-In
RLNIE   Back to Back Reach-In End Case

Less Floor Space Required

Installing standard reach-ins back to back requires about 88" of floor space, from bumper to bumper. The RLNI is 72" wide, bumper to bumper, saving about 16".

Reduced Installation Labor

Because the RLNI and the RLNIE are unitized, there is no need to set and line up two rows of back to back cases or add separate end cases. As a result, setting cases, wiring, and refrigeration and drain piping are all quicker and easier.

Lower Energy Costs

The RLNI uses about 4% less energy than our standard depth RL. In addition, it requires 9% less compressor horsepower in the rack, so you save money on your refrigeration systems. Add to this the inherent efficiency of Innovator and Innovator II doors, and we have a case that provides significant energy cost savings.

Perfect for Wide Island Replacement

If you want to increase frozen food product facings, this is an ideal way to do it. Most wide islands are about 82" wide. You can replace them with the 72" RLNI and watch your product facings skyrocket.

RLNIE Wrap Around Ends With Endless Doors Even More Product Facings

Replacing a wide island is one way to increasing product facings. Another is to use RLNIE end cases and get 360° of endless doors.

Same Product Capacity as Standard Reach-Ins

The product capacity per door in the RLNI is identical to the capacity of the standard depth RL. Maximum shelf depth of 22" is the same in both cases.

Innovator Doors

First came Innovator doors, reducing energy use by over 20% and increasing product lighting by over 40%. Next, Innovator II completely eliminated anti-sweat heat on doors and door perimeter frames, further reducing energy use by another 20%.

 

Note: These merchandisers are designed for use in stores when temperature and humidity do not exceed 75°F and 55% RH. We reserve the right to change or revise specifications and product design in connection with any feature of our products. Such changes do not entitle the buyer to corresponding changes, improvements, additions or replacements for equipment previously sold or shipped.